E&J Geothermal knows how much of an investment a new heating, air conditioning, air quality or geothermal system can be. That's why we want to help you protect your investment!
Geothermal |
Furnace |
Air Conditioner |
Gas Fireplace |
Generator |
|---|---|---|---|---|
| Inspect air coil & fan housing | Remove and clean burners | Clean condenser coil | Remove and clean glass | Verify proper gas pressures |
| Check loop water, heat exchanger, and hot water generator | Remove, test, and clean flame sensor | Check electrical components | Check blower for proper operation | Change oil (Oil not included) |
| Check condensate drain and pipe drain | Brush heat exchanger and check for cracks/holes | Check and record amp draw on compressor | Vacuum out fireplace and logs | Change air filter (Filter not included) |
| Add condensate drain pain treatment | Measure CO reading in flue and plenum | Check and record amp draw on blower motor | Re-spray inside of enclosure with flat black paint | Change oil filter (Filter not included) |
| Check back-up heat | Clean and flush condensate drain | Clean condensate trap and pump (if applicable) | Replace logs and redress embers | Verify proper operation of transfer switch |
| Check control panels | Inspect evaporator coil | Visual leak inspection on evaporator coil and condenser coil | Check for proper venting operations | Record all reading and hour usage |
| Check contactors, capacitors and relays | Test amp draw on blower motor | Verify refrigeration charges (Refrigerant not included) | Check electrical components for proper operations | Check electrical components for proper operations |
| Check compressor electrical draws | Inspect electrical components | Add condensate drain pan treatment | ||
| Check and clean filter | Replace air filters (Filters not included) | |||
| Yearly | Yearly | Yearly | Every 2 Years | Yearly |
|
Geothermal |
Furnace |
Air Conditioner |
||
|---|---|---|---|---|
| Inspect air coil & fan housing | Remove and clean burners | Clean condenser coil | ||
| Check loop water, heat exchanger, and hot water generator | Remove, test, and clean flame sensor | Check electrical components | ||
| Check condensate drain and pipe drain | Brush heat exchanger and check for cracks/holes | Check and record amp draw on compressor | ||
| Add condensate drain pain treatment | Measure CO reading in flue and plenum | Check and record amp draw on blower motor | ||
| Check back-up heat | Clean and flush condensate drain | Clean condensate trap and pump (if applicable) | ||
| Check control panels | Inspect evaporator coil | Visual leak inspection on evaporator coil and condenser coil | ||
| Check contactors, capacitors and relays | Test amp draw on blower motor | Verify refrigeration charges (Refrigerant not included) | ||
| Check compressor electrical draws | Inspect electrical components | Add condensate drain pan treatment | ||
| Check and clean filter | Replace air filters (Filters not included) | |||
| Yearly | Yearly | Yearly |
|
Gas Fireplace |
Generator |
Remove and clean glass | Verify proper gas pressures |
|---|---|
| Check blower for proper operation | Change oil (Oil not included) |
| Vacuum out fireplace and logs | Change air filter (Filter not included) |
| Re-spray inside of enclosure with flat black paint | Change oil filter (Filter not included) |
| Replace logs and redress embers | Verify proper operation of transfer switch |
| Check for proper venting operations | Record all reading and hour usage |
| Check electrical components for proper operations | Check electrical components for proper operations |
| Every 2 Years | Yearly |
